Ethernet to 8 Digital IO Lines
Features
- 8 Digital Inputs/Outputs
- Control any input or output from TTL to high voltage high current industrial devices
- Factory floor process control and automation
- User friendly software interface, Legacy compatible
- 0°C to +60°C Temperature range, Wall mountable
- Software APIs for Visual Basic, C# and more
Product Description
Ethernet to DIO device: 8 digital input/output channels. Powerful ARM 80 MHz, 32 Bit CPU. Offers robust and intelligent ‘control side’ devices that provide the interface to systems on the 24V factory floor environment, commonly referred to as ‘process side’. The device installs as a COM Port on the PC to give complete backwards compatibility essential for legacy applications.
Typical applications are control and switching of AC and DC motors, Fans, relay drivers, pumps, Voltage Regulators and Battery Chargers, LEDs and Bulbs, Air Conditioning, Heaters and Solenoids..
Technical Specifications
IO Channels | |
IO Protocols | Modbus TCP or DCON ASCII (over TCP or Virtual COM port) |
Description | 8 Digital Inputs/Outputs |
Digital Inputs | 8 |
Digital Outputs | 8 |
Analog Inputs | 0 |
Analog Outputs | 0 |
Watchdog | When device comms is lost, outputs can be set to predetermined state |
Power On Values | Outputs can be set to predetermined values on power on |
Safe Values | When Input triggered, outputs can be automatically set to predetermined value |
Digital IO | |
Input Logic Level 0 | 0.0V to +1.0V |
Input Logic Level 1 | +2.0V to +30V |
Input Latches | Triggered by user programmable positive or negative edges, stays true until acknowledged |
Input Counter | User progammable- counts positive or negative transitions up to 200Hz |
Digital Output Type | Open drain transistor, protected MosFET. Short circuit protection up to 36V. Over temperature shutdown -175°C typical 150°C min |
Maximum Output Load Voltage | 30 VDC |
Maximum Output Current Sink | 0.85A per channel |
Serial Port | |
Serial Gateway | No |
Protocol | RS232 |
Network | |
Number of Ports | 1 |
Network Port Type | RJ45 Jack 10/100 MHz Autosensing, Cross Over Autosensing (MDIX) |
Network Protocols | ICMP, IP, TCP, DHCP, HTTP |
Protection | 1500V Magnetic Isolation between ports and network |
Power | |
Power Input | 5V – 30V DC input, reverse polarity protected |
Power Supply 1 Description | Global Power Supply – PW-600 |
Power Supply 2 Description | Power supply PW-650 |
Max Input | 35 Volts |
General | |
Operating Temperature Range | 0 °C to +60 °C / 32 °F to +140 °F |
Industrial Standard | No |
Storage Temperature | 0 °C to +70 °C / +32 °F to +158 °F |
Galvanic Isolation | No |
Power Consumption | 100mA@24V 2.5W max |
Product Weight | 0.127 kg, 4.48 ounces |
Product Dimensions | 116x100x26 mm, 4.6×3.9×1.0 inches |
Packaged Weight | 0.223 kg, 7.87 ounces |
Packaged Dimensions | 160x135x49 mm, 6.3×5.3×1.9 inches |
GTIN (barcode) | 837324009811 |
Operating System Compatibility | |
Operating Systems |
|
You must be logged in to post a comment.