Peak Modules

• Adapter for the USB connection
  (USB 1.1, compatible with USB 2.0 and USB 3.0)
• Bit rates from 5 kbit/s up to 1 Mbit/s
• Time stamp resolution approx. 42 µs
• Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
• CAN bus connection via D-Sub, 9-pin
  (in accordance with CiA® 102)
• NXP SJA1000 CAN controller, 16 MHz clock frequency
• NXP PCA82C251 CAN transceiver
• 5-Volt supply to the CAN connection can be connected through a solder jumper, e.g. for external bus converter
• Voltage supply via USB
• Extended operating temperature range from -40 to 85 °C

• IPEH-002021E
• IPEH-002022E Optically  Isolated Version

• Complies with CAN specifications 2.0 A/B and FD
• CAN FD support for ISO and Non-ISO standard switchable
• CAN FD bit rates for the data field (64 bytes max.) from 25 kbit/s up to 12 Mbit/s
• CAN bit rates from 25 kbit/s up to 1 Mbit/s
• Time stamp resolution 1 μs
• CAN bus connection via D-Sub, 9-pin
  (in accordance with CiA® 102)
• FPGA implementation of the CAN FD controller
• NXP TJA1044GT CAN transceiver
• Galvanic isolation up to 500 V
• CAN termination can be activated through a solder jumper
• Measurement of bus load including error frames and overload frames on the physical bus
• Induced error generation for incoming and outgoing CAN messages
• 5-Volt supply to the CAN connection can be connected through a solder jumper, e.g. for external bus converter
• Voltage supply via USB
• Extended operating temperature range from -40 to 85 °C

• IPEH-004022

• Plug-on adapter for decoupling a CAN bus for PEAK CAN interfaces
• Galvanic isolation by DC/DC converters up to 500 V
• Bit rates from 5 kbit/s up to 1 Mbit/s
• High-speed CAN transceiver NXP PCA82C251
• Suitable for the use in CAN FD busses with data bit rates up to 2 Mbit/s and nominal bit rates up to 1 Mbit/s
• CAN bus connection via D-Sub, 9-pin (in accordance with CiA® 102)
• LED for status indication of the supply voltage
• 120 Ohm bus termination
• Power supply (5 V) through pin 1 of the High-speed CAN connection. Nearly all CAN interfaces by PEAK-System can provide the required supply
• Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

• IPEH-002038

• Adapter for High-speed USB 2.0 (compatible to USB 1.1 and USB 3.0)
• Transmitting and receiving of CAN FD and LIN messages using 2 D-Sub connections (both with pin assignment for the CAN FD and LIN bus)
• Time stamp resolution 1 μs
• 5-Volt supply at the D-Sub connector can be activated through a solder jumper, e.g. for external bus converter
• Voltage supply via USB
• Extended operating temperature range from -40 to 85 °C

CAN operation properties:

• Complies with CAN specifications 2.0 A/B and FD
• CAN FD support for ISO and Non-ISO standard switchable
• CAN FD bit rates for the data field (64 bytes max.) from 25 kbit/s up to 12 Mbit/s
• CAN bit rates from 25 kbit/s up to 1 Mbit/s
• FPGA implementation of the CAN FD controller
• NXP TJA1044GT CAN transceiver
• Each CAN FD channel is separately opto-decoupled against USB and LIN up to 500 V
• CAN termination can be activated through a solder jumper
• Measurement of bus load including error frames and overload frames on the physical bus
• Induced error generation for incoming and outgoing CAN messages

LIN operation properties:

• Bit rates from 1 kbit/s up to 20 kbit/s
• TJA1021/20 LIN transceiver
• Both LIN channels (common ground) are optodecoupled against USB and CAN FD
• Can be used as a LIN master or slave (1 ms master task resolution)
• Automatic bit rate, frame length, and checksum type recognition
• Autonomous scheduler with support for unconditional, event, and sporadic frames
• Hardware can work through a schedule table (up to 8 schedule tables can be configured with a total of 256 slots)
  • IPEH-004061

• PC plug-in card (PCIe x1) for PCI Express slots
• 1 or 2 High-speed CAN channels (ISO 11898-2)
• Complies with CAN specifications 2.0 A/B and FD
• CAN FD support for ISO and Non-ISO standards switchable
• CAN FD bit rates for the data field (64 bytes max.) from 25 kbit/s up to 12 Mbit/s
• CAN bit rates from 25 kbit/s up to 1 Mbit/s
• CAN bus connection via D-Sub, 9-pin
  (in accordance with CiA® 102)
• FPGA implementation of the CAN FD controller
• NXP TJA1044GT CAN transceiver
• Galvanic isolation on the CAN connection up to
  500 V, separate for each CAN channel
• CAN termination can be activated through a solder jumper, separately for each CAN channel
• PCIe data transfer via bus master DMA
• DMA memory access operations with 32- and 64-bit addresses
• Measurement of bus load including error frames and overload frames on the physical bus
• Induced error generation for incoming and outgoing CAN messages
• 5-Volt supply to the CAN connection can be connected through a solder jumper, e.g. for external bus converter
• Extended operating temperature range from -40 to 85 °C
  • IPEH-004026 Single Channel
  • IPEH-004027 Dual Channel

• PC plug-in card (PCIe-x1) for PCI Express slot
• Bit rates from 5 kbit/s up to 1 Mbit/s
• Compliant with CAN specifications
  2.0A (11-bit ID) and 2.0B (29-bit ID)
• CAN bus connection via D-Sub,
  9-pin (in accordance with CiA® 102)
• FPGA implementation of the CAN controller
  (SJA1000 compatible)
• NXP PCA82C251 CAN transceiver
• Galvanic isolation on the CAN connection up to 500 V, separate for each CAN channel
• 5-Volt supply to the CAN connection can be connected through a solder jumper, e.g. for external bus converter
• Extended operating temperature range from -40 to 85 °C
  • IPEH-003027

Optionally available:

• Single, dual, or four-channel version

• CAN interface for the PCI Express Mini slot
• CAN bus connection via connection cable and
  D-Sub, 9-pin (in accordance with CiA® 102)
• Bit rates from 5 kbit/s up to 1 Mbit/s
• Compliant with CAN specifications
  2.0A (11-Bit-ID) and 2.0B (29-Bit-ID)
• FPGA implementation of the CAN-Controller (SJA1000 compatible)
• NXP PCA82C251 CAN transceiver
• Galvanic isolation on the CAN connection up to
  300 V, separate for each CAN channel
• Space-saving dimensions thanks to SMD technology
• Extended operating temperature range from -40 to 85 °C
  • IPEH-003049 Dual channel

Optionally available:

• Single channel version IPEH-003048

• LED display for transceiver status
• High-speed CAN: AMIS 30660 transceiver, max. 500 kbit/s, switchable 120 Ohm bus termination
• Low-speed CAN: TJA1055 transceiver, max. 125 kbit/s, switchable 510 Ohm / 5.6 kOhm bus termination, bus error display
• Complies with CAN specifications 2.0 A/B
• Suitable for the use in CAN FD busses with data bit rates up to 5 Mbit/s and nominal bit rates up to 500 kbit/s
• The fiber-optic line consists of a 62.5/125 µm fibreoptic duplex line with ST connectors
• Aluminum casing
• CAN bus connection via D-Sub, 9-pin
  (in accordance with CiA® 102)
• Supply voltage: 6.5 – 30 V
• Supply via D-Sub 9 pin, or DC connector (jumper)
• Operating temperature range from 0 to 70 °C
  • IPEH-002026

Choice of 5 or 10 m FO cable, 62.5 / 125 µm duplex line ST connector. Other lengths available
on request.

• Form factor PC/104
• Multiple PC/104 cards can be operated in parallel (interrupt sharing)
• 14 port and 8 interrupt addresses are available for configuration using jumpers
• Bit rates from 5 kbit/s up to 1 Mbit/s
• Compliant with CAN specifications
• 2.0A (11-bit ID) and 2.0B (29-bit ID)
• Connection to CAN bus through D-Sub slot bracket, 9-pin (in accordance with CiA® 102)
• NXP SJA1000 CAN controller, 16 MHz clock frequency
• NXP PCA82C251 CAN transceiver
• 5-Volt supply to the CAN connection can be connected through a solder jumper, e.g. for external bus converter
• Extended operating temperature range from -40 to 85 °C

• IPEH-002055 2 Channel
• IPEH-002057 2 Channel Optically Isolated

• Form factor PC/104
• Use of the 120-pin connection for the PCI bus
• Up to four cards can be used in one system
• Bit rates from 5 kbit/s up to 1 Mbit/s
• Compliant with CAN specifications
  2.0A (11-bit ID) and 2.0B (29-bit ID)
• Connection to CAN bus through D-Sub slot bracket, 9-pin (in accordance with CiA® 102)
• NXP SJA1000 CAN controller, 16 MHz clock frequency
• NXP PCA82C251 CAN transceiver
• 5-Volt supply to the CAN connection can be connected through a solder jumper, e.g. for external bus converter
• Extended operating temperature range from -40 to 85 °C

• IPEH-002097 2 Channel Optically Isolated

• NXP LPC21 series microcontroller (16/32-bit ARM CPU)
• External 32 kbyte EEPROM
• High-speed CAN channel (ISO 11898-2) with bit rates from 40 kbit/s up to 1 Mbit/s
• Complies with CAN specifications 2.0 A/B
• Data transfer between CAN and RS-232 with a maximum bit rate of 115,200 bit/s
• One digital input and one digital output (low-activ)
• 2-color LED for status signaling
• Connection via a 10-pole terminal strip (Phoenix)
• Voltage supply from 8 to 30 V
• Extended operating temperature range from -40 to 85 °C
• Yagarto GNU ARM toolchain (GCC C/C++)
• Includes Demo firmware that routes from CAN to RS-232 and vice versa
• New firmware can be loaded via CAN interface
• To transfer the firmware via CAN, a PEAK CAN interface is required

• IPEH-002100

• Card for the PC Card slot
• Form factor Type II, maximum 5 mm in height
• Bit rates from 5 kbit/s up to 1 Mbit/s
• Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
• CAN bus connection via D-Sub, 9-pin (in accordance with CiA® 102)
• NXP SJA1000 CAN controller, 16 MHz clock frequency
• NXP PCA82C251 CAN transceiver
• Software option to switch on 5 Volt supply to CAN connection, e.g. for external bus converter
• Operating temperature range from 0 to 70 °C

• IPEH-002091

• High-speed USB 2.0 hub with
• CAN interface, D-Sub 9-pin connector (in accordance with CiA® 102)
• Two RS-232 ports, D-Sub 9-pin connectors
• Two High-speed USB 2.0 downstream ports
• Passive (bus-powered) hub operation through the USB port of a PC enables power consumption of up to 100 mA per USB channel
• Active (self-powered) hub operation through the optional external hub power supply
  (9 – 36 V) enables power consumption of up to 500 mA per USB channel
• Guaranteed high bit rates on all channels if a full-speed device is connected, thanks to a hub controller with 4 transaction translators
• CAN bit rates from 5 kbit/s up to 1 Mbit/s
• Time stamp resolution approx. 42 µs
• Compliant with CAN specifications 2.0A and 2.0B
• NXP PCA82C251 CAN transceiver
• 5-Volt and external power supply at the CAN connector connectible by solder bridges, e.g. for external bus converter
• Extended operating temperature range from -40 to 85 °C

• IPEH-002004

• NXP LPC21 series microcontroller (16/32-bit ARM CPU)
• External 32 kbyte EEPROM
• Two High-speed CAN channels (ISO 11898-2) with bit rates from 40 kbit/s up to 1 Mbit/s
• Complies with CAN specifications 2.0 A/B
• Galvanic isolation of the D-Sub connector CAN 2 (only applies to the opto-decoupled version)
• Status signaling with two 2-color LEDs
• Connections via two 9-pin D-Sub connectors or one 10-pole screw-terminal strip (Phoenix)
• Additional digital input (only applies to models with D-Sub connectors)
• Aluminum casing, optional with DIN rail fixing option available
• Voltage supply from 8 to 30 V
• Extended operating temperature range from -40 to 85 °C
• New firmware can be loaded via CAN interface
• Yagarto GNU ARM toolchain (GCC C/C++)
• Includes Demo firmware to forward CAN messages, including source files
• To transfer the firmware via CAN, a PEAK CAN interface is required

• IPEH-002211 D Sub connector Optically Isolated

• 4 High-speed CAN channels via plugable transceiver modules. Alternatively, Low-speed, Single-wire, and opto-decoupled High-speed modules, as well as High-speed modules without wake-up function available
• Wake-up function using separate input or CAN bus
• Complies with CAN specifications 2.0 A/B
• CAN connections are D-Sub, 9-pin
• CAN termination switchable, separately for each CAN channel
• CompactFlash card slot
• Battery buffered realtime clock (RTC), can also be used for wake-up
• Beeper
• Status LEDs for CAN channels, CompactFlash card, microcontroller, and power supply
• NXP microcontroller LPC2294
• Aluminum casing with flange. DIN rail fixing option available on request
• 8 – 27 V power supply, protection against overvoltage and reverse polarity
• Extended operating temperature range from -40 to 85°C (-40 to 185 °F)

Properties of the standard firmware:

• Detailed configuration with the software PPCAN-Editor 2 for Windows®
• Various function blocks for data processing and manipulation
• Configurable beeper
• Configurable CAN channel status LEDs
• Recording of CAN data and error frames to a CompactFlash card
• Conversion of logging data to various output formats using Windows® software

• IPEH-002212

• There are three different operating modes for the SW-CAN side which can be set using a sliding switch. Normal (33.3 kbit/s), High-speed
  (83.3 kbit/s) and Wake-up
• Indicator LEDs for power supply (red) and wake-up signals (yellow)
• Power supply (5 V, 150 mA) through HS-CAN connection (a current list of PEAK CAN interfaces with suitable supply voltage is available on request)
• If the power supply has a lower current output than 150 mA, an additional 12-Volt supply is needed via the SW-CAN connector
• Operating temperature range from 0 to 70 °C

• IPEH-002040

The PCAN-MiniDisplay is used as a human-machine interface for the visualization of CAN data. For the connection to the CAN bus, it has a High-speed and a Single-wire CAN connector. The graphic representation of incoming CAN data is configured before using the unit and then is performed on a TFT display.

Besides the display of CAN data, the PCAN-MiniDisplay can also be used for data logging. The data traffic is recorded to a memory card and can be analyzed on a PC later on.

In addition to the built-in PCAN-MiniDisplay there is a version in plastic casing with push buttons available. This can be used to create and evaluate application-specific configurations. Furthermore, the user can switch between different configurations during operation.

• IPEH-002262
• IPEH-002262-KSM01  With Display Case