SYSTEC Modules

USB-CANmodul1 – Single Channel CAN to USB Interface Module

  • PC connection: USB V2.0 Full-speed
  • 1 Optically Isolated CAN interface, high-speed CAN according ISO 11898-2
  • ISO 11898-1/2, Standard Frames, Extended Frames
  • SUB-D9 Male connector for CAN bus
  • 10kbps to 1Mbps bit rate
  • CAN bus features: Transmit Remote Frames
  • Listen only mode, 100µs hardware time stamp for received messages, Tx message receipt with timestamp
    Automatically transmission of cyclical messages by the module, Hardware acceptance filter, Callback events for receive, status change and connect/disconnect
  • PCAN View – a simple CAN monitor that allows for reception and transmission of CAN messages
  • Comprehensive programmers API including demo source for Microsoft Visual C++, LabView, Visual Basic .NET
  • CANopen API for .NET – based on SYS TEC CANopen Stack and allows for easy implementation of CANopen-enabled applications
  • SocketCAN based API for Linux
  • Windows® 8/7/Vista/XP (32/64 bit), Linux, WinCE 5.0, WinCE 6.0
Go to top
USB-CANmodul2 – Dual Channel CAN to USB Interface Module

  • PC connection: USB V2.0 Full-speed
  • 2 Optically Isolated CAN interface, high-speed CAN according ISO 11898-2
  • ISO 11898-1/2, Standard Frames, Extended Frames
  • SUB-D9 Male connectors for CAN bus
  • 10kbps to 1Mbps bit rate
  • CAN bus features: Transmit Remote Frames
  • Listen only mode, 100µs hardware time stamp for received messages, Tx message receipt with timestamp
    Automatically transmission of cyclical messages by the module, Hardware acceptance filter, Callback events for receive, status change and connect/disconnect
  • PCAN View – a simple CAN monitor that allows for reception and transmission of CAN messages
  • Comprehensive programmers API including demo source for Microsoft Visual C++, LabView, Visual Basic .NET
  • CANopen API for .NET – based on SYS TEC CANopen Stack and allows for easy implementation of CANopen-enabled applications
  • SocketCAN based API for Linux
  • Windows® 8/7/Vista/XP (32/64 bit), Linux, WinCE 5.0, WinCE 6.0
Go to top
CANopen Chip F40 – CANopen single board computer Module

  • Fujitsu MB90F352 16-bit microcontroller
  • Operating voltage: 5V ±10%
  • Current consumption 65mA typ, max. 140mA depending on I/O and CAN circuitry
  • Non-volatile memory storage for configuration data
  • Configuration: DIP-switches for easy configuration of node ID, baud rate and IO configuration
  • Available I/O configuration: Seven different IO configurations on 28 IO pins, selectable via DIP-switch and Object Dictionary
  • Low Level Digital Output < 0.4V
  • High Level Digital Output > 4.5V
  • Low Level Digital Input -0.3V < IN_LOW < 0.8V
  • High Level Digital Input 0.8 < VCC < (VCC + 0.3)V
  • Analog Input range VAGND … VREF
  • ADC Logical Resolution: 15-bit signed (OD value)
  • ADC Physical Resolution 10-bit
  • Analogue Input Capacitance: 10.7pF
  • ADC Reference Voltage: +2.7V…VCC
  • Output PWM Frequency 21kHz (CAN > 10kBit)
  • Output PWM frequency 11,5kHz (CAN = 10kBit)
  • CAN bus bitrate: 10kbit/s to 1Mbit/s
  • Operating temperature: -40°C to +85°C
  • Dimensions (LxWxH): 58,7mm x 24,0 mm x 11,8 ±0,3 mm
Go to top